Tom R.
Settled an inspection dispute on the spot.
Pulled the exact AS/NZS 3000 clause mid-inspection. Inspector had nothing to push back on.
Tailored for Australian sparkies, plumbers, gasfitters, builders, chippies, HVAC techs, solar installers and fire techs
Know the rules. Move fast.
Plain answers from AS/NZS standards, the NCC and state rules, with the clause or section they draw on.
Free plan. No card needed.
Sample chat. Sign up free to ask your own question.
470+Tradies onsite
4,400+Questions answered
60Standards cited
Trusted by Australian trades and partner suppliers.
What tradies are asking.
Real questions from the chat, anonymised and lightly edited. Sign up to ask your own.
The knowledge of a master tradie, in your pocket.
See, understand and apply what's needed for your role, your site, your install. Quick adjustment or full overhaul.
Cited to the standardAsk in plain English. Get the answer with the standard and the clause or section it draws on, so you can check it.
Tailored to your ticketElectrical, plumbing, gas, carpentry, HVAC, solar and fire. Answers are tailored to your trade, your state and your experience level.
Drawings on the jobUpload plans and drawings to the job and they are stored online with everything else for that job. StandardsMate reads PDF drawings when it drafts the scope, the job plan and its SWMS.
SWMS, fully auditableSite-specific Safe Work Method Statements built to the WHS Regulation. Stored online, version-tracked and shared by link with your crew and principal contractor, ready when an inspector asks. You review, sign off, job done.
Stay inside your ticketKnows the legal scope of your licence (electrical, plumbing, gas, building) and warns you when a question crosses into another trade. Before you do work you can't sign off on.
Built for the business of tradies.
Run your jobs in StandardsMate too. Job workspace, quotes, invoicing, SWMS, sign-offs: every decision bound to the job, not lost in your inbox.
What tradies who rely on it are saying.
From sparkies, plumbers, builders and site supers across Australia.
Jamie P.
Gets a Friday afternoon back every week.
Saves forty minutes on every SWMS. Cites the reg, flags what to confirm, done.
Dave M.
Ended a client argument in ten seconds.
Client argued the grade on a slab drain. Pulled up AS/NZS 3500.2 Table 5.2 on my phone. Conversation over.
Priya S.
Checked array clearances without leaving the roof.
Checked array setbacks and CEC rules from the roof. No climbing down for the laptop.
Mark T.
Sized a duct run on site, no callback to the office.
Sized the duct run and pulled the AS 1668 ventilation rate on site. No callback to the office.
Ben K.
Got the stair numbers right the first time.
Stair rise and going, balustrade gaps. Got the NCC numbers right the first time, no rework.
The story behind StandardsMate
Learn the trade. Do the work. Keep getting better.
StandardsMate brings standards questions, job paperwork and everyday tools into one place for Australian trades. The ambition is to help qualified tradies work with less admin, and help apprentices understand their trade, not just find an answer.
Why we’re building StandardsMate
The trade operating system, built around the size of your operation.
The first point of contact for tradies onsite. Australia wide.
Answers draw on the Australian Standards, the NCC and the state rules in the StandardsMate library, and name the clause they rely on, or the standard and section when no single clause fits. The library keeps growing.
Simple pricing.
Cancel anytime.
No hidden fees. All prices in AUD.
Free
$0
Try it on real jobs.
- 20 questions a month, after a 7-day open trial
- Photo of the board in, real answer out
- AS/NZS, NCC, WHS Acts + energy authority rules
- Every calculator, no limits
- Unlimited signed compliance reports
- 2 jobs a month, quoted and invoiced end to end
- 1 SWMS / safety document a month
Recommended
Pro
$49/mo
Running your own business. Quote, bill and stay compliant on every job.
- Unlimited questions + unlimited SWMS / safety documents
- Up to 10 jobs on the go at once
- Quote to invoice on every job
- Chats and SWMS grouped by job
- 5 people on each job alongside you
- Live site conditions: work windows + rain radar
- Job timeline and crew leaderboard on every job
- Your own branding on quotes, SWMS and compliance PDFs
- Apprentice Mate for electrical apprentices
- Email support
Create your account, then pay by card. Cancel any time.
Business
$79/mo
For busy crews with lots of jobs on.
- Everything in Pro, plus unlimited active jobs
- Up to 25 people on each job (Pro has 5). Subbies, builders and clients join free with their own login
- On every plan, workers sign SWMS / safety documents from their phone with no account
Want paid logins for your staff? Talk to us.
Start BusinessCreate your account, then pay by card. Cancel any time.
Prices in AUD and include GST.
Electrical apprentice? Apprentice Mate is included with Pro: 12 study modules, 162 practice questions and a timed mock exam for the electrical Capstone, plus the full StandardsMate chat.Start Pro →Bigger crew or a custom setup? Contact sales →
Frequently asked questions.
The compliance changes that hit your tools, before they hit your job.
AS/NZS revisions, NCC amendments and state regulator updates, the week they land.
No spam, unsubscribe any time. We never sell your details.
Tailored for every trade, role and state.
Pick your trade, role or state. We'll load a landing tuned to the clauses and regulators that apply to you.
By trade
By role